This is your best race set up. Features include four module rev limiter. Kit comes complete with wiring adapters, vibration mounts. Compatable with our RML401MT distributor.

THEORY OF 6 SERIES IGNITION

CAPACITIVE DISCHARGE

The MSD 6 Series Ignitions feature a capacitive discharge ignition design.  The majority of stock ignition systems are inductive ignitions.  In an inductive ignition, the coil must store and step up the voltage to maximum strength in between each firing.  At higher rpm, since there is less time to charge the coil to full capacity, the voltage falls short of reaching maximum energy which results in a loss of power or top end miss.  The MSD Ignition features a capacitor which is quickly charged (within one millisecond) with 460-480 volts and stores it until the ignition is triggered.  With the CD design, the voltage sent to the coil is always at full power even at high rpm.

MULTIPLE SPARKS

The MSD 6 Series produces full power multiple sparks for each firing of a plug.  The number of multiple sparks that occur decreases as rpm increases; however, the spark series always lasts for 20 degrees of crankshaft rotation.  Above 3,000 rpm there is simply not enough ?time? to fire the spark plug more than once, so there is only one powerful spark.

REV LIMITER

6AL:  This ignition is equipped with built-in Adjustable Soft Touch Rev Controls.  MSD Rev Limiters are adjustable with plug-in modules which are available in 100 rpm increments.  The Soft Touch circuitry provides a smooth and accurate rev limit by dropping the spark to individual cylinders.  The Soft Touch produces a load-free rev limit that is within 1% of the selected rpm.