This part is discontinued and no longer available. Please DO NOT
try to order.
FOR MORE DETAILS, GO TO "A BIT
For race applications only. Fits
all 1300, 1600, 1750 engines mating to 1750/2000 hydraulic bell
housings. At only 6.1 pounds it is 15.4 pounds lighter than a stock 215mm
unit. It mounts a late model light weight 130 tooth ring gear. This
quality 6061 aluminum flywheel mounts all of our Tilton 7.25"
clutches. See below for clutch options to use with this
Clutch/Flywheel weights, starter & ruggear specifications, see "Additional
Product Information" Section.
Assembled pricing is based on NO Ring gear FW kit
at $411, plus $125 assembly labor, plus current market price of applicable ring
Ring gear price may adjust up or down at time of
66-301HBF Tilton 7.25" rally
pressure plate. This is the most popular and versatile set up.
Developed for road rally, it is perfect for road race and vintage
66-001HBF Tilton 7.25" single metallic
disc. Full race setup for serious competition, where smooth engagement is
secondary to no slip banging through the gears. Clutch is either off or
on. This pressure plate is one pound lighter than the rally version.
This presssure plate is what one would use for a 30 minute shootout like the
66-002HBF Tilton 7.25 twin metallic
discs. Aggressive set up for lots of horsepower, like perhaps a Montreal
V8 or turbo twin spark engines.
64185-7-A-04 Titlon 7.25" rally
disc. Unsprung with six ceramic puck facing. Designed to take abuse
without burning up. Can be slipped to some degree for take off in first
64185-2-A-04 Tilton 7.25" metallic
disc. Unsprung with thin metallic coating. Full race grip with no
slip. See 64185-2-AA-04 for a twin disc
520455-7.25S4 Spruell Motorsport
7.25" rally disc. Sprung center is easy on the drive train for take off
and going through the gears. Our dual compound four puck ceramic discs are
the favorite for vintage racing. Requires our Spruell Motorsport
105-725-RB Spruell Motorsport
special aluminum adapter and contact bearing. The contact bearing can be
replaced as needed for $20.00.
STARTER NEEDED (all three will
work with 130 tooth ring gear)
- Bosch# 0001 211 025 Uses early Bosch
unit that came on 72-73 cars.Wt 14.5 pounds.
- Bosch# 0001 211 987 Bosh unit that came
on 1974 2.0 cars. Wt 14.5 pounds.
- Bosch# 0001 108 081 (weight 7.3#) Bosh unit
that came on 90-91 cars. Aluminum Housing n# 1005 821 419